Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350

Model: Enfield Meteor 350
Part: Headlight bulb

Video tutorial

In this tutorial, see how to replace the front headlamp bulb on a Royal Enfield Meteor 350, a very simple and quick operation. First, ensure the key is not inserted.

Then, position yourself in front of the motorcycle, locate the two screws at the bottom of the headlamp, and unscrew them using a flat-head screwdriver. Next, separate the headlamp from the base, disconnect the power connector, and remove the rubber cap. At this point, release the metal clip, extract the bulb, and install the replacement by following the reverse procedure.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350?
How to Replace the Front Headlamp Bulb on a Royal Enfield Meteor 350?
Meteor 350 .. This tutorial shows how to replace the front headlamp bulb on a Royal Enfield Meteor 350, a very simple and quick operation... …
How to Replace the Headlamp Bulb on the Royal Enfield Meteor 350?
How to Replace the Headlamp Bulb on the Royal Enfield Meteor 350?
Meteor 350 To replace the headlamp bulb on the Royal Enfield Meteor 350, loosen the screws that secure the headlight unit within its housing: these screws are l…
How to replace the headlight bulb on the Royal Enfield Meteor 350?
How to replace the headlight bulb on the Royal Enfield Meteor 350?
Meteor 350 As shown in this tutorial, replacing the headlight bulb on the Royal Enfield Meteor 350 is an extremely simple and quick operation. First, ensure tha…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos