|
Do it yourself
| |||
| ||||
How do you replace the rear brake pads on the Fantic Motor Caballero 500?
Model: Fantic Motor Caballero 500
Video tutorial
It will be possible to replace the rear brake pads of the Fantic Motor Caballero 500 by loosening the screws that secure the brake caliper to its housing, allowing it to be completely detached from its seat. At this point, the pin that holds the pads inside the caliper can be removed, enabling the old pads to be extracted. Now, the new pads can be inserted into the caliper so that it can be secured to the disc: the previously removed screws should be reinserted, ensuring that everything functions correctly.
Posted on 27 November 2025 by ScegliAuto
Related tutorials
Caballero 500
It will be possible to replace the motor oil of the Fantic Motor Caballero 500 by loosening the drain plug located in the central bottom part of the …
Caballero 500
To change the engine oil on the Fanatic Motor Caballero 500, loosen the oil drain plug located at the bottom of the bike between the footpegs. Collec…
|
How to Replace the Thermostat on the Gasgas EC 300
This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |