Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Here’s how to create flames from the exhaust on the Fantic XMF 125 (original) using the existing spark plug. You only need a spark plug socket to remove it; the motorcycle is already factory-equipped for this! The spark plug is located under the exhaust manifold; Fantic has mounted it in that position from the factory. Locate the spark plug in the manifold (bottom part of the exhaust), remove it, and reinsert it. Now, the exhaust gases will pass through the spark plug hole. The spark plug creates the spark that ignites the gases, resulting in pops and flames from the exhaust. The motorcycle is completely original. No modifications are needed; Fantic has designed this feature "from the factory". However, check local regulations regarding public roads.

Posted on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Service the Fantic 125 - Beta RR 125
How to Service the Fantic 125 - Beta RR 125
125 4t In this video, you will see step-by-step instructions for replacing the engine oil on a Fantic 125 4-stroke enduro motorcycle, as well as on the Beta…
How to Replace Engine Oil on a Fantic Motard 50
How to Replace Engine Oil on a Fantic Motard 50
Motard 50 How to replace engine oil on a Fantic Motard 50. Follow this guide to perform maintenance. Position the motorcycle on its original stand, remove the …
How do you replace the engine oil of the Fantic Motor Caballero 500?
How do you replace the engine oil of the Fantic Motor Caballero 500?
Caballero 500 It will be possible to replace the motor oil of the Fantic Motor Caballero 500 by loosening the drain plug located in the central bottom part of the …

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos