Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror from a Fantic Motor Enduro Motorcycle

Model: Fantic Motor Enduro
Part:

Video tutorial

Let's see how to remove the mirror from a Fantic Motor Enduro motorcycle (right side). Unscrew the tightening bolt using the appropriate spanner.

Once the tightening bolt is loosened, unscrew it by hand (as shown in the video). For reassembly: screw the mirror into the thread with the bolt into the thread above the handlebars; hold the mirror with one hand and tighten the nut with the spanner using the other.

Finally, test the mirror's correct operation and adjust the view while sitting on the bike. Install the left mirror in the same way as the right mirror.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Fantic Motor Caballero 500?
How do you replace the engine oil of the Fantic Motor Caballero 500?
Caballero 500 It will be possible to replace the motor oil of the Fantic Motor Caballero 500 by loosening the drain plug located in the central bottom part of the …
How do you replace the rear brake pads on the Fantic Motor Caballero 500?
How do you replace the rear brake pads on the Fantic Motor Caballero 500?
Caballero 500 It will be possible to replace the rear brake pads of the Fantic Motor Caballero 500 by loosening the screws that secure the brake caliper to its hou…
How to Change the Engine Oil and Air Filter on the Fanatic Motor Caballero 500?
How to Change the Engine Oil and Air Filter on the Fanatic Motor Caballero 500?
Caballero 500 To change the engine oil on the Fanatic Motor Caballero 500, loosen the oil drain plug located at the bottom of the bike between the footpegs. Collec…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos