Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : Manufacturer's coat of arms

Fiat 500 - Manufacturer's coat of arms

Fiat 500 (2007-2022 / 312)
How to replace the rear logo on the Fiat 500 Abarth

Let's see how to remove the rear logo of the Fiat 500 Abarth; We have to put body tape where we decide to pry. In any case, at the point where we leverage we …read all…
Posted on 27 November 2022 by ScegliAuto
Fiat 500 (2007-2021 / 312)
How to remove and replace the rear emblem on the Fiat 500

In this short video we will see the instructions that will allow us to disassemble and replace the rear emblem of the manufacturer on the Fiat 500 312. First …read all…
Posted on 24 February 2024 by ScegliAuto
Fiat 500 (2007-2021 / 312)
How to replace the front emblem of a Fiat 500

Before we can begin, we will have to open the front hood of our Fiat 500. Let's start by unscrewing and removing the screws that secure the front bezel of the …read all…
Posted on 11 January 2024 by ScegliAuto

Cigarette Lighter (2) Airbags (25) Alternator (5) Loudspeaker (3) Shock absorbers (8) Antenna (4) Air conditioning (4) Car stereo (79) Roof Rack Bars (10) Battery (18) Coil (1) Air Vents (4) Arm (2) Gearbox (7) Spark plugs (8) Glow plugs (2) Soft top (8) Carburetor (3) Bodywork (7) Glove box (1) Control unit (7) Wheel rim (1) Key (60) Timing belt (20) V-belt (2) Air conditioning (4) Air conditioning controls (4) -board computer (62) Checks and maintenance (297) Dashboard (18) Gearshift gaiter (7) Drive shaft boot (3) Bearing (2) Differential (1) Brake discs (4) Rear bench seat (3) Side indicator light (1) Headlight (24) Tail light (24) Fog lights (11) Air filter (28) Cabin air filter (45) Petrol filter (4) Diesel filter (10) Oil filter (17) Hand brake (2) Clutch (9) Injectors (3) Window lift switch (2) Accessory Kit (8) Light bulb (23) Side turn signal light bulb (4) Headlight bulb (59) Rear light bulb (36) Interior lights ceiling light bulb (10) Antifreeze liquid (2) Dashboard light (8) License plate light (14) Third brake light (1) Handle (35) Muffler (1) Engine (13) Window motor (3) Starter motor (10) Gear oil (8) Brake oil (1) Engine oil (25) Door panel (29) Windshield (7) Front bumper (27) Rear bumper (10) Brake pads (13) Tires (11) Gear Shift Knob (27) Pump (4) Fuel pump (9) Door (7) Push button (4) Instrument cluster (58) Radiator (4) Passenger compartment heating radiator (2) Wheel (11) Fuse box (52) Seat (29) Drive shaft (1) Coolant temperature sensor (1) Lock (6) Brake system (1) Lambda sensor (2) Suspensions (4) Outside rearview mirror (28) Manufacturer's coat of arms (3) Engine mount (1) Drums and shoes (1) Windscreen wipers (22) Thermostat (5) Engine head (1) Steering rods (1) Central tunnel (3) Valve (1) Interior blower (6) Side window (9) Steering wheel (12)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos