Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to remove and replace the rear emblem on the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Manufacturer's coat of arms
Operation: How to remove and replace the rear emblem on the Fiat 500

In this short video we will see the instructions that will allow us to disassemble and replace the rear emblem of the manufacturer on the Fiat 500 312. First of all, let's disassemble and remove the old emblem; we use a very thin metal wire to unglue and detach it, as shown in the video. At this point we are going to clean the area of the emblem with some degreaser, in order to make the surface perfectly flat and smooth; we insert the caps on the holes of the logo and we go to reassemble the new emblem, removing the protection of the bio adhesive and centering it well!


Posted on 24 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos