Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
Video tutorial

Removing the rear bumper is very straightforward, and with the right tools, you can avoid removing the wheels. It is recommended to use a short crosshead screwdriver, known as a 'stubby', to facilitate the removal of the screws that connect the edge of the bumper to the wheel arch lining.

Once the wheel arch lining is detached from the bumper, you can unscrew the Torx screw that secures the corner of the bumper to the wing. Repeat the same operation on the other side, then unscrew the screws along the lower edge and those located just below the rear lights, within the closure line of the boot.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on a Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today’s video, see how to remove the front bumper on a Fiat Punto Evo and Grande Punto by following these simple steps. First, open and lift the b…
Removing the Front Bumper on a Fiat Punto Evo
Removing the Front Bumper on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Remove the front bumper from the Fiat Punto Evo? Here’s how to take off the damaged bumper at the front. Lift the car on a jack to remove the screws …
How to Remove the Front Bumper on a Fiat Punto EVO?
How to Remove the Front Bumper on a Fiat Punto EVO?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will see how to remove the front bumper on a Fiat Punto EVO, a very simple and quick operation. First, open the bonnet, then un…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos