Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the light control button of the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, Grandepunto , 199 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Push button

Video tutorial

Let's briefly see the main instructions that will allow us to disassemble and replace the external lights switch or control of the Fiat Grande Punto, as well as the Punto Evo. First of all, we get on board the cabin and start gently levering the cap of the lights control to remove it, using something thin and pointed; then we gently remove the circuit inside, replacing it with a new one or cleaning it with a contact cleaner, as shown in the video.

At this point, we reassemble the switch, checking its operation!


Posted on 15 October 2024 by ScegliAuto


Related tutorials

How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, Grandepunto , 199) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
Removing the Front Left Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, Grandepunto , 199) Removing the door panel from a Fiat Grande Punto. Follow these steps. Before starting the removal work, disconnect the battery terminals located in t…
How to Replace the Air Filter in a Fiat Grande Punto?
How to Replace the Air Filter in a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, Grandepunto , 199) In this tutorial, see how to replace the air filter in a Fiat Grande Punto, an extremely simple and quick operation. First, ensure that the engine is…

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos