Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Fiat Cronos?

Model: Fiat Cronos 358s, X6S - Years 2018-2026
Part: Service warning light

In order to reset the Service light on the Fiat Cronos, you need to connect a diagnostic tool to the OBD port of the vehicle, located on the dashboard just below the steering column. Once the connection is made, you can select the specific car model and its corresponding version. Following this procedure will allow you to select the car model and corresponding version, making the light disappear. You can then disconnect the scanner and turn off the ignition.

Posted on 12 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Cronos?
How do you reset the Service light on the Fiat Cronos?
Fiat Cronos (2018-2026 / 358s, X6S) To reset the Service light of the Fiat Cronos, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: on…
How do you reset the Fiat Cronos Service indicator?
How do you reset the Fiat Cronos Service indicator?
Fiat Cronos (2018-2026 / 358s, X6S) All cars, including the Fiat Cronos mentioned above for which we have a video presentation, are subject to scheduled maintenance, which is reminded t…
How to reset the service light on the Fiat Cronos
How to reset the service light on the Fiat Cronos
Fiat Cronos (2018-2026 / 358s, X6S) The steps to reset the service light of the Fiat Cronos can only be performed using a PC for diagnostics connected to the vehicle. With the instrumen…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos