Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Service warning light

To reset the Service light that appears on the dashboard of the Fiat 500, you need to connect a diagnostic tool to the vehicle's OBD port: this will be located on the dashboard immediately below the steering column. Once the connection is made, you can select the specific car model and its corresponding version: you must now follow all the further instructions shown in the video. By doing this, the light will be completely reset and you can disconnect the scanner from the OBD port.

Posted on 7 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you perform the service and reset the service light in the Fiat 500 X?
How do you perform the service and reset the service light in the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) In this short video guide, we see the essential steps and tools to use for a maintenance service of the Fiat 500, including changing the engine oil, …
How to reset the service light (oil change) on the Fiat 500 X
How to reset the service light (oil change) on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this short and simple guide we will understand what are the steps that will allow us to reset the service light of the ordinary maintenance of the…
How to reset the "Service" light on a Fiat 500
How to reset the "Service" light on a Fiat 500
Fiat 500 (2012-2023 / 500 L) Before we can start with the reset, we will have to make sure that the service has been carried out, and then sit in the driver's seat of our Fiat 50…

    Frequently Asked Questions

    • 500 2007-2024 - How to reset the Fiat 500 service warning light? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos