Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the dashboard components of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Dashboard

In this guide we will see the instructions that will allow us to disassemble the main components of the Fiat 500 dashboard. First, we get on board the cabin and start disassembling and removing the radio, inserting the appropriate extraction tools into the holes behind the radio buttons; then we remove the plastic partition of the dashboard and the air conditioning control panel, disconnecting the electrical wiring located at the back, as shown in the video. At this point, we also remove the air vents, then disassemble the instrument panel for the dashboard removal.

Posted on 2 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pump on a Fiat 500
How to Replace the Clutch Pump on a Fiat 500
Fiat 500 (2007-2022 / 312) To replace the clutch pump on the Fiat 500, open the bonnet to access the components inside the engine bay. You will need to remove the battery by di…
How to Reset the Service Light on a Fiat 500?
How to Reset the Service Light on a Fiat 500?
Fiat 500 (2014-2022 / 500 X) To reset the service light on a Fiat 500, first sit in the driver’s seat and turn on the ignition. Then, press the accelerator pedal fully three time…
How to Replace the Clutch Cylinder on a Fiat 500
How to Replace the Clutch Cylinder on a Fiat 500
Fiat 500 (2007-2022 / 312) To replace the clutch cylinder on a Fiat 500, open the bonnet to access the components inside the engine bay. You will need to disconnect the battery…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos