Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulb with a LED

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part:

See other generations:
Video tutorial

On some cars, the third brake light consists of a series of incandescent bulbs, which should be replaced with modern LED lights when they burn out. Before starting this operation, first check the type of bulb that was installed, so you can purchase the corresponding LED. Also, make sure to get red LEDs and pay attention to ensure the electrical contacts are of the same type; if not, make the necessary modifications.

Open the tailgate and remove the cover above the rear window, disconnect the electrical connection, and release the lamp holder.

Replace them with the LEDs, and reconnect them for a test: if a bulb does not light up, remove it and rotate it 90 degrees to change polarity. Once confirmed that everything is working correctly, reassemble everything in reverse order.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Install LED Lights on the Fiat 500
How to Install LED Lights on the Fiat 500
Fiat 500 (2007-2022 / 312) If you want to replace the front headlight bulbs with equivalent LED models, you can find the instructions for replacement and installation in the de…
How to Install LED Headlights in a Fiat 500 Sport.
How to Install LED Headlights in a Fiat 500 Sport.
Fiat 500 (2007-2022 / ) In this video tutorial, you will see how to install LED headlights in a Fiat 500 Sport. Lift the bonnet and secure it with the appropriate prop; proc…
How to Change All the Lights on a Fiat 500L
How to Change All the Lights on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Replacing the bulbs on the Fiat 500L is very simple; open the bonnet and look inside, remove the cap of the dipped beam. The bulb inside is a push-fi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos