Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to install LED headlights in a Fiat 500 Sport.

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2022
Part: Headlight bulb
Operation: How to install LED headlights in a Fiat 500 Sport.

In this video tutorial, we can see how it is possible to install LED headlights in a Fiat 500 Sport. Lift the engine hood and secure it with a special rod; proceed by unscrewing the cap of the light housing, then disconnect the power cable, then we must remove the spring (press the spring and push it to the right), then we must extract the halogen bulb from its socket. To install the new LED bulbs, first we must remove the plastic ring from the LED bulb; insert the ring into the bulb housing (see illustrative video) and close the iron spring to hold the ring we inserted earlier in place. Now we must insert the LED bulb by fitting it into the socket to prevent it from moving. Connect the power cable and insert the cables into the housing; reposition the cap and screw it into place. Repeat the same procedure on the other side. Turn on the vehicle to test the correct functioning of the LEDs.


Posted on 15 August 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2021 - Where are the front fog lights of the Fiat 500 mounted? Read Answer
    • 500 2012-2023 - Which dipped beam bulbs are fitted on the Fiat 500L? Read Answer
    • 500 2007-2022 - Why are the daytime running lights of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - The position lights of my Fiat 500 are not working, what can I do? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb in the vintage Fiat 500L? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb on a Fiat 500? Read Answer
    • 500 2012-2023 - How to replace the parking light on a Fiat 500X? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos