Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Installation of front LED lights on Fiat 500L

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Headlight
Operation: Installation of front LED lights on Fiat 500L

In this video we see the assembly of full LED bulbs on the headlight of a Fiat 500L. To operate in a more comfortable way, it is advisable to remove the lighthouse from its seat. We start by removing the two dust caps, then we disconnect the power. Now disengage the two tabs and extract the halogen bulbs from their housing. We can install either a bi-led or a 360 degree, at least 13,000 lumens possibly. For the installation of the headlights, since they have a cooling fan, it is advisable to install oversized dust caps; furthermore we must remember to install a resistor on the negative if it is not already integrated in the headlights.


Posted on 2 June 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - What can be the reason why the daytime running lights on the Fiat 500 do not light up? Read Answer
    • 500 2007-2022 - Why don't the daytime running lights on the Fiat 500 work? Read Answer
    • 500 2007-2022 - What model are the front position light bulbs of the Fiat 500 series 312? Read Answer
    • 500 2007-2023 - How to remove the headlights on Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos