Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs with LEDs on a Fiat 500L

Model: Fiat 500 500 X - Years 2014-2022
Part: Fog lights

Follow these steps to replace the bulbs with LEDs on a Fiat 500L. Start by using a suitable screwdriver to remove the plastic cover from the lower part of the bumper, reaching the side fog light located in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover under the car's bumper with the attached clips. Test the correct functioning of the lights. Perform this replacement on the front and rear lights to achieve the same type of illumination.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Front LED Lights on Fiat 500L
Installation of Front LED Lights on Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, you will see the installation of full LED bulbs in the headlamp of a Fiat 500L. For easier access, remove the headlamp from its housin…
How to Change All the Lights on a Fiat 500L
How to Change All the Lights on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Replacing the bulbs on the Fiat 500L is very simple; open the bonnet and look inside, remove the cap of the dipped beam. The bulb inside is a push-fi…
Replacing Bulbs on a Fiat 500L
Replacing Bulbs on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Replace the non-functioning bulbs on a Fiat 500L. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos