Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Bulbs on a Fiat 500L

Model: Fiat 500 500 L - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

Replace the non-functioning bulbs on a Fiat 500L. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Locate the inspection cap of the headlight (located at the rear of the headlight) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulbs.

Fit the new bulbs (always the correct type and size) and insert the bulb holder back into the headlight housing.

Close the front headlight. Test if the bulbs are working.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light Bulbs on the Fiat 500L
Replacing the Rear Light Bulbs on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, see how to dismantle and replace the rear light bulbs on the Fiat 500L, following the instructions below. First, open the boot of the …
Bulb Replacement on a Fiat 500
Bulb Replacement on a Fiat 500
Fiat 500 (2012-2023 / 500 L) Replacing blown bulbs? Here’s how to do it on a Fiat 500L. Lift the front bonnet of the car, locate the inspection cap of the headlamp (at the rear o…
Removing Front Headlamp Bulb on Fiat 500L
Removing Front Headlamp Bulb on Fiat 500L
Fiat 500 (2012-2023 / 500 L) Remove the front headlamp bulb on the Fiat 500L. Open the bonnet by pulling the lever located at the bottom right of the dashboard. Locate the inspec…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos