Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Headlamp Bulb on Fiat 500L

Model: Fiat 500 500 L - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

Remove the front headlamp bulb on the Fiat 500L. Open the bonnet by pulling the lever located at the bottom right of the dashboard. Locate the inspection cap of the headlamp and disconnect it (round shape).

At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulbs using a screwdriver. Install the new bulbs (always the correct type and size) and insert the bulb holder back into the headlamp housing.

Test the operation of the bulbs. Close the engine bonnet after installation.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents on a Fiat 500L
How to Remove the Air Vents on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this short video tutorial, see the instructions for removing the air vents on a Fiat 500L in simple and quick steps. First, get inside the vehicle…
Removing the Cabin Fan Motor from the Fiat 500L
Removing the Cabin Fan Motor from the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today's main instructions will show you the procedure for removing and replacing the cabin fan motor from the Fiat 500L. First, get inside the vehicl…
How to Lower and Raise the Rear Seats in a Fiat 500L
How to Lower and Raise the Rear Seats in a Fiat 500L
Fiat 500 (2014-2022 / 500 X) Let’s see how to lower and raise the rear seats in a Fiat 500L. This video explains how to manoeuvre the seat to move it forward and free up usable s…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos