Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Fiat Linea

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shift knob

Video tutorial

Replacing the gear knob of your Fiat Linea is undoubtedly one of the simplest operations that you can also perform independently and without any particular expertise in car maintenance. Below you will find a description of all the various steps that you need to follow to complete the replacement.

First of all, make sure you have a new gear knob compatible with your Fiat Linea, then get into the car and remove the old gear knob by turning it counterclockwise. Finally, install the new gear knob and you're done.


Posted on 19 January 2025 by ScegliAuto


Related tutorials

Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Fiat Linea (2007-2018 / MK 1) In this guide, we will see the main instructions on how to disassemble and replace the starter motor of the Fiat Linea 1.3 MultiJet. First, let's ope…
How to Replace the Windshield Wiper Motor on a Fiat Linea?
How to Replace the Windshield Wiper Motor on a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To replace the windshield wiper motor on a Fiat Linea, open the hood to access the bolts securing the grille at the base of the windshield. Once the …
Where Are the Fuses Located on the Fiat Linea?
Where Are the Fuses Located on the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) The fuses for the Fiat Linea are housed in specific fuse boxes installed in the vehicle: this car model has two. The first is located inside the cabi…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos