Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Motor on a Fiat Linea?

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

Video tutorial

To replace the windshield wiper motor on a Fiat Linea, open the hood to access the bolts securing the grille at the base of the windshield. Once the screws are loosened, you can detach the panel and proceed to unscrew the bolts holding the wiper motor.

After disconnecting the connector, you can remove the mechanism from its housing to install a new one. Then, reattach the grille at the base of the windshield and the wiper blades.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Fiat Linea (2007-2018 / MK 1) In this guide, we will see the main instructions on how to disassemble and replace the starter motor of the Fiat Linea 1.3 MultiJet. First, let's ope…
Where are the fuses located in the Fiat Linea?
Where are the fuses located in the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) Any fuse present inside the Fiat Linea is positioned inside one of the appropriate fuse boxes that are responsible for containing them: in this type …
What is the fuse diagram of the Fiat Linea?
What is the fuse diagram of the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) If any devices in our Fiat Linea have suddenly stopped working, we can first check the status of the relevant fuses, the diagrams of which are indica…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos