Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the starter motor for the Fiat Linea 1.3 MultiJet

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Starter motor

Video tutorial

In this guide, we will see the main instructions on how to disassemble and replace the starter motor of the Fiat Linea 1.3 MultiJet. First, let's open the vehicle's hood and begin to disassemble and remove the battery and the battery holder; then we will unscrew the screws of the starter motor, accessing it from underneath the vehicle as shown in the video.

Now let's disconnect the electrical wiring of the starter motor, removing it and replacing it with the new original one; let's install it and connect it, finally checking the engine's ignition!


Posted on 23 January 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Fiat Linea?
How to Replace the Cabin Air Filter in a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) In the Fiat Linea, the cabin air filter is located directly behind the glove compartment, protected and contained in a specific box. Before replacing…
How to Replace the Windshield Wiper Motor on a Fiat Linea?
How to Replace the Windshield Wiper Motor on a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To replace the windshield wiper motor on a Fiat Linea, open the hood to access the bolts securing the grille at the base of the windshield. Once the …
How to Remove the Front Bumper of the Fiat Linea?
How to Remove the Front Bumper of the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To remove the front bumper of the Fiat Linea, loosen all the screws and rivets that secure it to the front of the vehicle: these screws will be acces…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos