Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the gear knob of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Shift knob

Below we will see the instructions that will allow us to disassemble and replace the gear knob of the Fiat 500, in simple steps. First of all, we climb aboard the cockpit and start removing the plastic cover of the gear knob, levering on the sides; then we unscrew the central bolt of the knob, in order to remove it from the gear lever, as shown in the video. At this point we install the new gear knob, of the right type (compatible with our car); we fix it correctly with the screw and properly fix the upper plastic cover!

Posted on 25 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the gear knob of the Fiat 500L
Replacement of the gear knob of the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Below we will see information on how to disassemble and replace the gear knob of the Fiat 500L. First, we get into the car and start by removing the …
Replace the Gear Knob on a Fiat 500
Replace the Gear Knob on a Fiat 500
Fiat 500 (2007-2024 / 312) Do you want to replace the gear knob in your Fiat 500? Let's see how to do it in this video. First, remove the plastic cover on the knob with a screw…
Replacement of the gear knob on Fiat 500 Abarth.
Replacement of the gear knob on Fiat 500 Abarth.
Fiat 500 (2014-2022 / 500 X) Also for the replacement of the gear knob on the Fiat 500 Abarth, it is advisable to place the car in a firm position, so that it is stable and safe.…

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos