Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the gear knob of the Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Shift knob

Below we will see information on how to disassemble and replace the gear knob of the Fiat 500L. First, we get into the car and start by removing the plastic cover of the gear knob, using a thin lever; then we unscrew the central screw of the knob with a socket wrench with extension, as shown in the video. At this point, we pull the knob upwards to detach and remove it, also removing the spring with it; we replace and properly install the new gear knob, inserting the spring first and securely fastening it with the central screw.

Posted on 3 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob Gaiter on the Fiat 500L
How to Replace the Gear Knob Gaiter on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) To replace the gear knob gaiter on the Fiat 500L (the video shows the entire lever removed, but this procedure can be done with the gear lever instal…
Guide to replacing the gear knob of the Fiat 500
Guide to replacing the gear knob of the Fiat 500
Fiat 500 (2007-2024 / 312) Below we will see the instructions that will allow us to disassemble and replace the gear knob of the Fiat 500, in simple steps. First of all, we cli…
How to Replace the Gear Knob on the Fiat 500
How to Replace the Gear Knob on the Fiat 500
Fiat 500 (2007-2022 / ) If the gear knob on your Fiat 500 shows excessive signs of wear and you want to replace it with a new one, follow these quick and simple steps. First…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos