|
Do it yourself
| |||
| ||||
How do you reset the Service light of the Fiat Argo?
Model: Fiat Argo
MK 1
- Years 2017-2024
The operation of resetting the Service light that appears on the instrument panel of the Fiat Argo can be done by connecting a diagnostic tool to the OBD port of the vehicle: this port will be located on the dashboard just below the steering column. Once the connection is made, it will be possible to select the car model and its version: then you can follow the further instructions of the tutorial to ensure that the light is completely reset. At the end of the procedure, you can disconnect the scanner and turn off the instrument panel permanently.
Posted on 26 March 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Argo
(2017-2024 /
MK 1)
In order to reset the Service light of the Fiat Argo, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…
Fiat Argo
(2017-2024 /
MK 1)
To reset the Service light that is shown on the instrument panel of the Fiat Argo, you need to connect a diagnostic tool to the OBD port of the vehic…
Fiat Argo
(2017-2024 /
MK 1)
To reset the Service light that appears on the instrument panel of the Fiat Argo, you need to connect a diagnostic tool to the vehicle's OBD port: th…
Other guides you may be interested in
|
How to Replace the Front Headlamp Bulb on a Fiat Grande Punto
To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.057
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
