Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Struts on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Hydraulic pistons

Learn how to replace the tailgate struts on a Fiat Panda. This is a very simple operation, follow these steps: lift the rear tailgate of the boot and secure it, then use a screwdriver to release the metal clips that hold the gas struts. Disconnect the struts at both ends, remove the worn strut, and install the new piece. Secure the strut with the metal clips. Repeat the same process for the twin strut. Finally, reassemble and test the struts by opening and closing the tailgate.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Fiat Panda tailgate piston
How to replace the Fiat Panda tailgate piston
Fiat Panda (2003-2012 / 169, MK 2) How to replace the hydraulic pistons of the Fiat Panda tailgate? Let's see the replacement of the pieces. Lift the tailgate and secure it with a stic…
How do you remove the rear light of the Fiat Panda?
How do you remove the rear light of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In order to remove the rear light of the Fiat Panda, you need to open the tailgate of the luggage compartment, so that it is possible to access the s…
Replacement of the license plate lights of the Fiat Panda
Replacement of the license plate lights of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's instructions will briefly show us how to disassemble and replace the license plate bulbs of the Fiat Panda. First, let's move to the rear of …

How to Replace the Timing Belt on the BMW X3

Unlatch and lift the hood, then you will need to remove all the parts above the area where you will be working. As shown in the video, you can remove the screws to take off the upper panels. Now you need to remove the air filter cover from the engine. In any case, you will need to remove all obstructing parts until you reach the belt. In the diagram, you can see which pulley acts as the tensioner, so loosen it to remove the belt. Once the tension is off the belt, you can take it out and replace it without issues. Retrace the steps in reverse for reassembly of the various components.

Watch the video!


by ScegliAuto

More videos