Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part:

The tyre pressure light, also known as the TPMS light, illuminates on the instrument cluster of the Fiat Panda when it is necessary to adjust the tyre pressures. To reset the light, after checking the tyre pressures, turn on the vehicle's instrument cluster and select "TPMS" from the service menu. Hold the OK button for a few seconds to start the TPMS reset procedure. Once the reset is complete, restart the instrument cluster to confirm the changes made. If the reset fails, visit an authorised workshop to check the tyre pressure sensors.

Posted on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a 2022 Fiat Panda
How to Reset the TPMS Light on a 2022 Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today, I will explain how to reset the tyre pressure light on a 2022 Fiat Panda. Before resetting the TPMS light, it is necessary to check the tyre p…
How to Reset the Service Light on the Fiat Panda?
How to Reset the Service Light on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) To reset the Service light on the Fiat Panda, connect a diagnostic tool to the OBD port of the vehicle, located at the lower left of the dashboard re…
How to Reset the Service Light on a Fiat Panda
How to Reset the Service Light on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Follow these steps to reset the maintenance light for the oil change on a Fiat Panda, as well as on other models from the manufacturer. First, get in…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos