Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stabilizer bar on the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Anti-roll bar

In this video we can see how to replace the stabilizer link on a Fiat Panda 169: first, we lift the car so we can remove the wheel. Once this operation is done, we will see the link in the front, which we will have to remove by removing the lower and upper nut: to make it easier, we will use Svitol or WD-40, so we can easily remove it from the bar. We can find replacement parts for example on Ebay with code 314969599367 at a price of 19.99 euros, free delivery. Just reconnect the bolts of the new link to the bar and then put the wheel back in place.

Posted on 20 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear differential silent blocks on the Fiat Panda 4x4?
How to replace the rear differential silent blocks on the Fiat Panda 4x4?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear differential silent blocks on the Fiat Panda 4x4, first loosen the bolt and nut securing the stabiliser bar at the rear. Once the…
How to Replace the CV Boot on a Fiat Panda?
How to Replace the CV Boot on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, see how to replace the CV boot on a Fiat Panda. First, lift the front of the vehicle with a jack, taking all necessary precautions.…
Fitting Roof Bars on a Fiat Panda 169
Fitting Roof Bars on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows how to fit roof bars on a Fiat Panda 169. This operation can be done without a mechanic and involves a few simple steps. Use a cross…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos