Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the glow plugs of the Fiat Ducato?

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Glow plugs

See other generations:
Video tutorial

Glow plugs are a very important component of a diesel engine, in fact thanks to them the preheating temperature necessary to allow the subsequent starting of the engine is obtained. These are components that tend to wear out over time, so they must be replaced at a certain mileage interval, as indicated in the vehicle's user manual.

In this video tutorial we can see where they are installed, namely in the engine block, and removing them requires the use of a socket wrench of the appropriate size, being careful not to apply excessive force and break them.


Posted on 5 September 2025 by ScegliAuto


Related tutorials

Replacing the Glow Plugs on a Fiat Ducato 2.3 MultiJet
Replacing the Glow Plugs on a Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) This guide provides the main instructions on how to remove and replace the glow plugs on a Fiat Ducato 2.3 MultiJet. First, open the bonnet of the ve…
Replacement of the Fiat Ducato 2.3 Multijet preheating glow plugs
Replacement of the Fiat Ducato 2.3 Multijet preheating glow plugs
Fiat Ducato (2006-2014 / X250) Today we will discover the main instructions that will allow us to disassemble and replace the glow plugs of the Fiat Ducato 2.3 Multijet. First of a…
How do you replace the glow plugs in the Fiat Ducato 2.3 Multijet?
How do you replace the glow plugs in the Fiat Ducato 2.3 Multijet?
Fiat Ducato (2006-2014 / X250) The glow plugs, as the name suggests, are responsible for raising the temperature of the engine in diesel vehicles, in order to allow it to start lat…

Where is the Battery Located in a Toyota RAV4 Hybrid?

In this video, see where the battery is located in a Toyota RAV4 Hybrid, useful in case you need to replace it or perform an emergency start. As shown, it is positioned at the rear of the vehicle, specifically at the base of the right wall of the boot. To access it, first remove the floor panel, then disassemble the right drawer and subsequently the small glove compartment. To remove it, simply unscrew the two bolts of the upper bracket and disconnect both terminals, always starting with the negative.

Watch the video!


by ScegliAuto

More videos