Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Gear Oil of a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Transmission fluid

To change the gear oil of the Fiat Grande Punto, you need gear oil with the Fiat specification 9.55550-M5, which can be found on auto-doc.it for £17.99 plus £9.95 shipping. Warm the oil slightly by driving a short distance to help it flow better. Lift the car and secure it on axle stands. Locate the fill plug on the side of the gearbox, higher up, which requires a 12mm Allen key; the drain plug is located at the lower rear of the gearbox (8mm Allen key). First, unscrew the fill plug (the one on top). This step is important to ensure you can open it BEFORE draining it completely (if it's stuck, you won't be able to go back). Position a container underneath and unscrew the drain plug (the one at the bottom) to let all the old oil out (which we will dispose of at an authorised centre). Refill with new oil through the side fill hole using a syringe or funnel. Add oil until it starts to overflow from the fill hole, indicating that you have reached the correct level. Fit a new plug and tighten it with the 12mm Allen key.

Posted on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Below we will see the instructions that will allow us to disassemble and replace the front driveshaft or front axle of the Fiat Grande Punto. First, …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before starting, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrument panel by turning the key in the ignition swit…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos