Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Pulse

Model: Fiat Pulse 363 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

Video tutorial

Resetting the service light on a 2022 Fiat Pulse is a simple and quick task you can do yourself. To reset the service light, turn on the ignition and press the accelerator pedal three times while holding down the brake pedal.

This procedure will allow you to update the mileage for the next service interval. After completing this, the instrument cluster display will start to flash; by releasing both pedals and restarting the ignition, you will have completed the reset procedure.

If the reset does not occur automatically, you will need to visit a shop for a computerized diagnosis.


Posted on 6 March 2026 by ScegliAuto


Related tutorials

How to Disable and Activate the Airbag in the Fiat Pulse?
How to Disable and Activate the Airbag in the Fiat Pulse?
Fiat Pulse (2021-2026 / 363) In this tutorial, you will see how to disable and activate the passenger airbag in the Fiat Pulse. Disabling is necessary, according to the highway c…
How to Double the Trunk Capacity of the Fiat Pulse
How to Double the Trunk Capacity of the Fiat Pulse
Fiat Pulse (2021-2026 / 363) To double the trunk capacity of your Fiat Pulse, start by removing the parcel shelf, move the rear bench seat forward, and fold down the rear seatbac…
How to Activate Traction Control on a Fiat Pulse
How to Activate Traction Control on a Fiat Pulse
Fiat Pulse (2021-2026 / 363) This guide shows how to activate or deactivate the traction control on a Fiat Pulse by following the instructions below. First, get in the vehicle an…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos