Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the service light on the Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

The instructions in this guide will allow you to reset the service light for routine maintenance on the Fiat 500. In this case, a specific diagnostic tool is used, which should be connected to the OBD port; turn on the ignition to enable communication with the control unit.

At this point, select the make and model of the vehicle, then go to the appropriate service section to confirm and execute the reset of the maintenance light, as shown in the video.

Disconnect the tool and turn off the ignition, then start the engine!


Posted on 27 October 2026 by ScegliAuto


Related tutorials

Fiat 500 (2014-2022 / 500 X) In this brief video guide, follow the essential steps and tools required for a service on the Fiat 500, including engine oil change, oil filter, and …
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will find instructions that will allow you to effectively reset the service light for the regular maintenance oil change …
Fiat 500 (2012-2023 / 500 L) Before you can start the reset, ensure that the service has been carried out, then sit in the driver's seat of your Fiat 500. Begin by activating the…

    Frequently Asked Questions

    • 500 2007-2022 - What does the coupon expired warning light on the Fiat 500 mean? Read answer
    • 500 2007-2022 - What does the service light indicate in the FIAT 500? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the engine oil light on the Fiat 500? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Rear Hatch Cover of the Mercedes B-Class

In this video, you will learn how to remove the rear hatch cover of the Mercedes B-Class. You will need a small flathead screwdriver to remove the handle cover. Use long-nosed pliers to gently remove the clips inside. The next step is to carefully insert a plastic spatula into the gap created to start removing the cover; it is advisable to start from the sides and work towards the centre. Disconnect the courtesy light connector, and continue gently removing the plastics by leveraging the gaps created, always starting from the sides. Be cautious of clips and wiring, and handle everything with care.

Watch the video!


by ScegliAuto

More videos