Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacing the rear light bulbs on a Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Rear light bulb
Operation: Replacing the rear light bulbs on a Fiat 500

Replacing the bulbs on this car is really very easy and fast and above all within the reach of everyone regardless of your experience. You will need a 10mm wrench, preferably a socket or a Phillips screwdriver, to remove the two bolts that secure the headlight to the frame. After removing them, pull the headlight backwards without turning it so as not to break the two fasteners on the side opposite the bolts. Now remove the bulb housing plate from the rest of the headlight by unhooking the 4 plastic clips that hold the two pieces together, in this way you will have access to the 4 bulbs that need to be replaced.


Posted on 6 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Why is the brake light of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - Why are the brake lights of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - Which taillights does the Fiat 500 mount? Read Answer
    • 500 2014-2022 - How to replace rear light bulbs in Fiat 500X? Read Answer
    • 500 2007-2023 - How many reversing lights are there on the Fiat 500? Read Answer
    • 500 2014-2022 - How many reversing lights does the Fiat 500X have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos