Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the rear light bulbs of a Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Tail light
Operation: How to replace the rear light bulbs of a Fiat 500

Let's see how to replace the rear light bulbs of a Fiat 500. Let's open the tailgate of the luggage compartment, let's put it in safety. We locate the lighthouse and unscrew the tightening screws placed on the sides of the lighthouse itself (screws on the side of the lighthouse). We remove the rear light from the metal housing (as in the video); we take out the lamp holders from the headlight and we go to extract the damaged bulbs (with the help of a screwdriver). We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We reassemble all the previously disassembled pieces.


Posted on 19 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How to replace the brake light bulb on the Fiat 500l? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos