Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Refit the Bumper

Model: Fiat Coupé MK 1, Progetto175 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Front bumper

Video tutorial

You may need to remove the bumper to carry out a repair or replace it with a modified one to enhance the appearance of your car. As shown in the video guide, after unscrewing all the screws that secure the bumper to the rest of the vehicle, carefully start to pull it out sideways.

Once the bumper is detached, take care to disconnect the fog light cables, and at this point, you can finally remove the bumper completely.

Before starting the operation, it is advisable to lay down a cloth or blanket where you will place the removed part to prevent the painted surface of the bumper from getting scratched when you set it down.


Updated on 1 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Jetta
How to Remove the Front Bumper from a Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Does removing the bumper from your car seem like a daunting task? Watch this video to see how to do it properly. First, unscrew the screws of the cen…
Fitting Rear Bumper on Fiat 600
Fitting Rear Bumper on Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video, you will see how to fit the rear bumper on the small Fiat 600. First, insert the new bumper and start securing it by placing and tight…
How to Replace the Front Grille of the Kia Seltos
How to Replace the Front Grille of the Kia Seltos
Kia Seltos (2019-2026 / MK 1) To replace the front grille of the vehicle, follow these steps: open the hood and use a socket wrench to remove the central screw that holds the fron…

How to adjust the handbrake on the Smart Fortwo?

To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been removed from its seat, loosen the screws securing the corresponding brake drum, locating the shoes and the handbrake mechanism. This can be adjusted by tightening or loosening the shoes to regulate the intensity of the handbrake; once the adjustment is complete, verify that the operation has been successfully finished.

Watch the video!


by ScegliAuto

More videos