Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Air Conditioning on a Fiat Stilo 1.9 JTD

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Warning light – error code

In this video tutorial, you will see the instructions to reset the air conditioning on a Fiat Stilo 1.9 JTD by following these steps; this procedure can also be used for other vehicles from the same manufacturer. First, get in the vehicle and turn on the ignition; then press both air conditioning control buttons simultaneously and hold them for a couple of seconds, as shown in the video. At this point, you will see the numbers start to flash until the temperature readings appear; all that’s left is to check its operation!

Updated on 1 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Fuel Pump from the Fiat Stilo 1.9 JTD?
How to Remove the Fuel Pump from the Fiat Stilo 1.9 JTD?
Fiat Stilo (2001-2010 / MK 1) In this video tutorial, you will see how to remove and replace the fuel pump of the Fiat Stilo with a 1.9 JTD engine. First, climb into the rear and …
Air conditioning reset on Fiat Stilo
Air conditioning reset on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this guide today, we will see how to reset the dual-zone air conditioning system in our Fiat Stilo, a model produced from the year 2001 to 2010. F…
How do you reset the air conditioner of the Fiat Stilo?
How do you reset the air conditioner of the Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) To reset the air conditioning system of the Fiat Stilo, you will need to press and hold down the two buttons located on the sides of the control pane…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos