Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air conditioning reset on Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Warning light – error code

In this guide today, we will see how to reset the dual-zone air conditioning system in our Fiat Stilo, a model produced from the year 2001 to 2010. First of all, we need to turn on the car's instrument panel without starting the engine, then we press and hold down the "AUTO" and "MONO" buttons at the same time as shown in the video. This will start a countdown on the air conditioning display, so we continue to hold down the two buttons until the time expires. Once this is done, the air conditioning system will perform a forced restart.

Posted on 14 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the air conditioner of the Fiat Stilo?
How do you reset the air conditioner of the Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) To reset the air conditioning system of the Fiat Stilo, you will need to press and hold down the two buttons located on the sides of the control pane…
How to Reset the Air Conditioning on a Fiat Stilo 1.9 JTD
Fiat Stilo (2001-2010 / MK 1) In this video tutorial, you will see the instructions to reset the air conditioning on a Fiat Stilo 1.9 JTD by following these steps; this procedure …
How to Remove the Climate Control Switches on a Fiat Stilo
How to Remove the Climate Control Switches on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Before you begin, sit in the driver's seat of your Fiat Stilo. Start by removing the radio, unclipping the surrounding trim, unscrewing the securing …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos