Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Door Panel on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Door trim panel

Remove the small screw cover (with a flathead screwdriver) located behind the opening handle and unscrew the underlying screw. Also, unscrew the screw in the small door pocket, then remove it and unscrew the now exposed screws. Remove the window winder by simply pulling it off with a lever (it is held in place by a clip). Using a plastic wedge, pry along the entire seam of the panel to detach it from the bodywork. Disconnect the lock wire to proceed with the complete removal. As you can see, this is a very simple operation.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Door Panel on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Remove the door panel of a Fiat Punto to replace it or work inside. Use a screwdriver to undo the screws on the door panel (top side of the door open…
How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
Removing the Front Door Panel of the Fiat Punto
Removing the Front Door Panel of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide shows you how to remove and replace the front door panel of the Fiat Punto, following the instructions below. First, open the front door a…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos