Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Door Panel on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Door trim panel

Remove the door panel of a Fiat Punto to replace it or work inside. Use a screwdriver to undo the screws on the door panel (top side of the door opening and the screws under the handle). Remove the speaker grille, undo the remaining screws on the door panel, and detach the retaining clips. Remove the mirror control knob. Pull the panel away with your hands and disconnect it from the door (disconnect the power wiring and the opening cable). Perform the desired maintenance inside the door or fit the new panel.

Updated on 17 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
Removing the Front Door Panel of the Fiat Punto
Removing the Front Door Panel of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide shows you how to remove and replace the front door panel of the Fiat Punto, following the instructions below. First, open the front door a…
How to Remove the Panel on Fiat Punto
How to Remove the Panel on Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Want to remove the door panel of a Fiat Punto? Open the door and let's see how to do it. Unscrew the retaining screws located in the internal handle …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos