Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Door trim panel

In this video, you will see how to remove the front door panel and the speaker on the Fiat Grande Punto, as well as on the Punto Evo. First, open the front door and start by removing all the fixing screws found on the sides of the panel; then remove the screw located inside the opening handle and near the grab handle, as shown in the video. At this point, remove the window switch button by disconnecting the electrical connector; then lever the sides of the panel to unclip and remove it, disconnecting the handle cable. The replacement of the speaker is shown afterwards!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel and Handle on a Fiat Grande Punto
Removing the Door Panel and Handle on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will learn how to remove the front door panel and the external handle on a Fiat Grande Punto. First, remove the door panel by u…
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, o…
How to Remove the Front Left Door Panel on a Fiat Grande Punto
How to Remove the Front Left Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the front left door panel on a Fiat Grande Punto? Here's how to proceed: before starting the disassembly work, disconnect the battery t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos