Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wipers of a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
Video tutorial

Before starting, exit the cabin and head to the front of your Fiat Punto. Begin by lifting both front wipers by pulling them upwards.

Next, turn the blades so that they are perpendicular to the support arms. At this point, unclip the two clips that secure the blades.

This will free the blades, allowing you to remove them. Once this step is completed, you will have successfully disassembled them and can proceed to fit the new wiper blades.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Replacing Wiper Blades on Fiat Punto
Replacing Wiper Blades on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this tutorial, you will learn how to remove and replace the front and rear wiper blades on a Fiat Punto 188. First, lift the wiper arm: to remove …
Removing the Wiper Motor from a Fiat Grande Punto
Removing the Wiper Motor from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will learn how to remove the wiper motor from a Fiat Grande Punto. First, remove the wipers by unscrewing the nuts to take them…
Replacing the Wiper Motor on Fiat Punto
Replacing the Wiper Motor on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this guide, learn how to replace the wiper motor on a Fiat Punto. Pull the plastic lever located at the bottom left of the dashboard, lift the eng…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos