Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : Fiat Ducato front bulb replacement

Fiat Ducato - Video tutorial

Model: Fiat Ducato X290 - Years 2014-2023
Part: Headlight bulb
Operation: Fiat Ducato front bulb replacement

Lift the hood and put on the special support rod. Looking at the rear of the light, the one inside the engine compartment, you will notice a round cover that you will have to unscrew and remove. As often happens, at this point you will have a connector connected to the bulb and a metal stop to hold everything in place. Disconnect the connector by pulling on it and not on the wires (usually there is a small tab to press) and lift the metal clip. Remove the used bulb and insert the new one. Close the metal clip, connect the connector and mount the cover.


Posted on 21 January 2024 by ScegliAuto



How to replace the side mirror bulb of a Fiat Ducato?
Fiat Ducato (2014-2023 / X290) To replace the side mirror bulb of a Fiat Ducato, you need to follow a few steps. Start by removing the bulb cover inside the door, which is secured
Fiat Ducato headlight bulb replacement
Fiat Ducato (2014-2023 / X290) How to replace the headlight bulb on a Ducato? We lift the front hood and find the back of the headlight. We can remove the headlight if we have spac
How do you replace the headlight bulb on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) The headlight bulb on the Fiat Ducato is replaced by opening the bonnet of the vehicle, so that you can access the components inside the engine compa

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos