Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Oil Change on Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Warning light – error code

Turn on the ignition with the appropriate key (do not start the engine, it is not necessary). The manual procedure is as follows: press the accelerator pedal fully down and then, at the same time, press the brake pedal seven times. Once done, wait another minute before releasing the accelerator pedal. When the minute has passed, release the pedal and turn off the ignition. Wait another minute and, once restarted, you should see "oil change completed". This procedure is not to be considered a substitute for the service but should only be used after performing the service.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light (with Diagnostics) on the Fiat Tipo 356
How to Reset the Service Light (with Diagnostics) on the Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) Follow this brief guide to reset the service light for the regular oil change maintenance on a Fiat Tipo 356, using a diagnostic tool. First, connect…
Reset Tyre Pressure Warning Light on Fiat Tipo
Reset Tyre Pressure Warning Light on Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this video, you will learn how to reset the service warning light for the oil change maintenance on a Fiat Tipo. To proceed with the reset, you ne…
How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to reset the Uconnect system in the Fiat Tipo? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos