Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Headlight bulb

To replace the front headlamp bulb (H7 model), you do not need to remove the headlamp. Simply open the bonnet, remove the protective cap from the bulb holder, disconnect the power connector, and then release the retaining spring of the bulb. Insert the new bulb, avoiding touching the glass with your fingers, secure it with the retaining spring, reconnect the power connector, and then reposition the protective cap. Perform a check to ensure it lights up, and if you notice a significant difference in brightness compared to the other headlamp, it is advisable to replace that one as well.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Front Headlight Bulb
Replacement of Front Headlight Bulb
Fiat Punto (1999-2011 / MK 2, 188) To replace the left front headlight bulb, unscrew the headlight fixing screws (three bolts using a 10 mm spanner, two on the grille and one at the fr…
How to Replace the Fog Light Bulb on a Fiat Punto
How to Replace the Fog Light Bulb on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To replace the front fog light bulb, first lift the car using a jack and then remove the wheel corresponding to the bulb you want to replace. Once th…
How to replace the front headlight bulb of the Fiat Punto 2005
How to replace the front headlight bulb of the Fiat Punto 2005
Fiat Punto (1999-2011 / MK 2, 188) If you own a 2005 Fiat Punto and want to replace the headlight bulb, then read the following guide and follow the steps described. First, lift the fr…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos