|
Do it yourself
| |||
| ||||
Replacing Front Headlight Bulb on Fiat Punto 2
Model: Fiat Punto
MK 2, 188
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
In this video tutorial, learn how to remove and replace the front headlight bulb on a Fiat Punto second series. First, open and lift the bonnet; then remove the rubber protective cap and disconnect the electrical connector of the bulb. At this point, unclip the metal spring and remove the bulb as shown in the video; now replace it with a new one of the correct type (in this case, H1) and refit it in the correct orientation. Finally, reassemble everything, following the video tutorial to the end!
Updated on 16 April 2026 by ScegliAuto
Related tutorials
Fiat Punto
(1999-2011 /
MK 2, 188)
If you own a 2005 Fiat Punto and want to replace the front headlamp bulb, read this guide and follow the steps outlined. First, lift the bonnet and r…
Fiat Punto
(2005-2018 /
Grandepunto , Punto EVO, MK 3, 199)
Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
Fiat Punto
(1999-2011 /
MK 2, 188)
To replace the front fog light bulb, first lift the car using a jack and then remove the wheel corresponding to the bulb you want to replace. Once th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.070
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |