Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wishbone on Fiat Punto 199

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Control arm

See other generations:
Video tutorial

Loosen the bolts of the affected wheel. Lift the car with a ramp, if you have one, or with a jack.

Unscrew the bolts completely and remove them. Using a wire brush and WD-40 spray, clean the joints of the wishbone.

Wear safety glasses and a mask. Unscrew the pin that secures the ball joint.

Remove the fixing bolts and the front fixing piece. Then unscrew the rear fixing elements that connect the wishbone to the subframe.

Now, with a hammer and your preferred tool, you can slide the wishbone out of its seat. Reverse the process to install the new wishbone.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads on Fiat Punto 199
Replacing Front Brake Pads on Fiat Punto 199
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove and replace the front brake pads on a Fiat Grande Punto and Punto Evo 199. First, loosen the whe…
How to Remove the Steering Wheel Airbag of the Fiat Punto 199?
How to Remove the Steering Wheel Airbag of the Fiat Punto 199?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the airbag located on the steering wheel of the Fiat Punto 199, loosen the two screws found at the back of the steering wheel, one on the l…
How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos