Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the upper engine support of the Fiat Multipla?

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Engine

To be able to replace the upper engine support of the Fiat Multipla, you need to open the hood and unhook the four screws that secure the plastic cover resting on the car engine. Once the plastic cover has been removed, a 16 wrench must be used to loosen the bolts located on the support to the left of the engine, and remove the support itself. Before doing this, it is necessary to insert a jack with a board under the engine, in order to prevent it from falling. At this point it will be possible to insert the new support and fix it again with the same bolts previously removed.

Posted on 26 August 2021 by ScegliAuto

Video tutorial

Related tutorials

Where is it and how to reach the cigarette lighter fuse of a Fiat Multipla?
Where is it and how to reach the cigarette lighter fuse of a Fiat Multipla?
Fiat Multipla (1998-2010 / MK 1) The cigarette lighter fuse of our Fiat Multipla is located inside the fuse box. In turn, the fuse box is located inside the upper left side of the da…
How to remove the battery of a Fiat Multipla
How to remove the battery of a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, we will have to open the front hood of our Fiat Multipla by pulling the special opening handle, positioned at the bottom left of the…
Where is the OBD port of the Fiat Multipla located?
Where is the OBD port of the Fiat Multipla located?
Fiat Multipla (1998-2010 / MK 1) If you own a Fiat Multipla and want to locate the OBD port of the vehicle, all you have to do is carefully read the following guide and follow the st…

How to Remove the Headlight Bulb on a Honda Civic

Are the front headlight bulbs on your Honda Civic faulty? Follow this instructional video for the disassembly process. Open the bonnet of the engine compartment, remove the inspection caps from the headlights using a screwdriver, detach the bulb holders from the headlight, and disconnect the respective power connectors. Replace the damaged bulbs with new ones of the same size and voltage. After replacing the bulbs, reinstall the bulb holder in the headlight housing. Finally, close the rear of the headlights with the inspection caps. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos