Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the rear window wiper on the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Windscreen wipers
Operation: How do you replace the rear window wiper on the Fiat 500?

To be able to replace the rear window wiper blade on the Fiat 500, lift the rear window wiper arm and arrange the blade so as to incline it at 90Â ° with respect to the arm. At this point, it will be possible to press on the side flaps of the brush and release it from the arm, so that it can be replaced with a new spare part. The new blade must therefore be wedged into the fixing pin of the arm, which can be lowered again and put in contact with the rear window. After replacement, it will be possible to check the correct functioning of the new piece installed.


Posted on 10 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - What causes the windshield wiper problem on the Fiat 500? Read Answer
    • 500 2007-2022 - What to do if the windshield wipers do not work in the Fiat 500? Read Answer
    • 500 2007-2022 - What to do if the Fiat 500 windshield wipers don't work? Read Answer
    • 500 2007-2022 - What is the problem with the windshield wiper of the Fiat 500? Read Answer
    • 500 2007-2022 - What is the cause of the problem with the windshield wipers on the Fiat 500? Read Answer
    • 500 2007-2021 - Why do the wipers no longer work in the Fiat 500? Read Answer
    • 500 2007-2023 - Why does the Fiat 500 rear wiper not work? Read Answer
    • 500 1957-1975 - Where is the water tank for the windshield wipers located in the vintage Fiat 500? Read Answer
    • 500 2007-2023 - Where is the Fiat 500 windshield washer pump located? Read Answer
    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos