Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rear Headlamp Bulb

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Tail light bulb

In this video, observe the procedure for replacing the rear headlamp bulb on a Fiat Punto. The illumination of the yellow bulb-shaped warning light on the dashboard indicates a potential issue with a headlamp bulb or its grounding. In this case, the problem is the malfunction of the right rear headlamp, which does not stay lit properly and flashes intermittently. You will need to remove and extract the entire headlamp unit and disconnect the multi-connector that supplies power: at this point, check that it is intact and proceed to clean it.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlamp Bulb
Replacing the Rear Headlamp Bulb
Fiat Punto (1999-2011 / MK 2, 188) This video shows how to dismantle and replace the bulb of the rear headlamp. First, take the standard key located in the spare wheel compartment to u…
Replacement of Rear Number Plate Light
Replacement of Rear Number Plate Light
Fiat Punto (1999-2011 / MK 2, 188) Locate the lamp holder for the number plate light beneath the bumper. Using a medium-sized flat screwdriver, press on the side tab of the holder and …
Replacement of the Rear Headlamp Bulb and Removal of the Light Unit
Replacement of the Rear Headlamp Bulb and Removal of the Light Unit
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) To replace the bulb of the rear lights, it is necessary to remove the entire light unit assembly. The screws are accessible on the side of the pillar…

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos