Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

This video shows how to dismantle and replace the bulb of the rear headlamp. First, take the standard key located in the spare wheel compartment to unscrew the two screws of the lamp.

Once you locate the two screws, one under the carpet in the boot and another just behind the rear seatbelt attachment hidden by the cover cap, unscrew them. Remove the lamp and disconnect the connector with the wires; unscrew the lamp screws and extract the circuit with the attached bulbs.

Identify the bulb to be removed and replaced, check if it works, and reassemble everything.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Replacement of the Rear Headlamp Bulb
Replacement of the Rear Headlamp Bulb
Fiat Punto (1999-2011 / MK 2, 188) .. In this video, observe the procedure for replacing the rear headlamp bulb on a Fiat Punto. The illumination of the yellow bulb-shaped warning.. …
Replace the Fog Light Bulb on a Fiat Grande Punto
Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, we will go through the steps to remove and replace the fog light bulb on a Fiat Grande Punto, as well as on the Punto Evo. To ac…
Replacing the Rear Light Bulbs on the Fiat Punto
Replacing the Rear Light Bulbs on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, learn how to remove and replace the bulbs in the rear light, particularly the stop light, on the Fiat Punto. First, open the …

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos