Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Fiat Punto rear light bulbs replacement

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Rear light bulb
Operation: Fiat Punto rear light bulbs replacement

In this video tutorial we will see how to remove and replace the rear light bulbs, in particular the stop light, of the Fiat Punto. First of all, we open the tailgate of the trunk and start by removing the side carpet covering; then unscrew the plastic screw of the light and disconnect the electrical connector of the bulbs to remove it from the outside, as shown in the video. At this point we separate the lamp holder from the ceiling lamp, removing and replacing any faulty bulbs; we apply the reverse procedure for reassembly!


Posted on 12 September 2022 by ScegliAuto



How do i replace the rear light bulbs of the Fiat Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In order to replace the Fiat Punto rear light bulbs, lift the tailgate and loosen the screws that will now be accessible, near the gasket. When these
How to remove the rear light of the Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today we will see, in this video tutorial, how to remove and replace the rear light of the Fiat Punto Evo, but also of the Grande Punto. First of all
Fiat Punto rear light bulb replacement
Fiat Punto (1999-2011 / 188, MK 2) Today we will see how to remove and replace the rear light bulbs of a second series Fiat Punto. First of all we open and lift the tailgate of the boo

    Frequently Asked Questions

    • Punto 2005-2018 - Why doesn't the rear fog light on the Fiat Punto Evo work? Read Answer
    • Punto 2005-2018 - Where are the position lights of the Fiat Punto Evo located? Read Answer
    • Punto 2005-2018 - How many reversing lights does the Fiat Punto have? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos