Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on a Fiat Punto 2 (188)

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

Today we will discover the step-by-step instructions to remove and replace the rear light bulbs on a Fiat Punto 188, second series. First, open the boot and start by removing the plastic caps to access the screws of the light; then unscrew these to pull the lamp out from the outside, using a socket wrench.

At this point, disconnect the electrical connector of the bulbs; separate the bulb holder from the housing to access the bulbs; simply remove and replace them, following the video tutorial to the end!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light Bulbs on the Fiat Punto
Replacing the Rear Light Bulbs on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, learn how to remove and replace the bulbs in the rear light, particularly the stop light, on the Fiat Punto. First, open the …
Replacement of the rear light and bulbs of the Fiat Punto.
Replacement of the rear light and bulbs of the Fiat Punto.
Fiat Punto (1999-2011 / MK 2, 188) Today we will discover the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Fiat Punto. First, let's op…
Replacing the Rear Headlamp Bulb on a Fiat Punto
Replacing the Rear Headlamp Bulb on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Today, you will learn how to remove and replace the rear headlamp bulbs on a second series Fiat Punto. First, open and lift the boot lid and move the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos